SM AUDI 2.5 TFSI EVO EA855 EV980 Upgrade MPI Injector Set
SHARP MOTORSPORT AUDI 2.5 TFSI EVO DAZA, DNWA, DNWC EA855 UPGRADE MPI 980CC INJECTOR SET
Providing the extra fuel needed for when wanting to get the most on the dual-injected EA855 Engine, replacing the original MPI injectors
The perfect choice when using a TTE700, TTE777 Upgrade turbocharger, or other big frame turbos available.
Tuning partners considered the best in Europe tested many injectors before deciding on these as the best option of choice.
Perfect choice for APR, BEVO, DVX, BRP, UNITRONIC, JD ENGINEERING, software calibration options.
Genuine UK Sourced Bosch Motorsport Injectors
Batch colour matched sets (blue, red, orange)
All-New Generation Bosch fuel injectors will function at rail pressures in excess of 101 PSI, 7 bar.
Will maintain consistency to a minimum pulse width of only 1.5 ms.
Excellent low pulse width response with predictable response down to 2ms.
Excellent atomisation for modern multi-valve engines.
Set of 5 Injectors
Set of 5 Wiring harness adapters
BOSCH EV14 Based Injectors
Precision Cut Atomiser
Loom Adapters included
7 point multi hole
High Impedance
Excellent Response Characteristics
980cc/min = 670g/min = 89lb/hr @ 3bar approx
12-ohm resistance
Petrol & E85 compatible
Plug & Play
Needs Specific Software Adjustment
Colour batch matched set
Not sold as a flow matched set(Same as APR & UNITRONIC)
Static max flow in test environment:
29 PSI (2 bar) 720cc / min = 69 lb / h
43,5 PSI (3 bar) 900cc / min = 86 lb / h
58 PSI (4 bar) 1038cc / min = 99 lb / h
78,5 PSI (5 bar) 1170cc / min = 111 lb / h
88 PSI (6 bar) 1284cc / min = 122 Ib / h
101,5PSI (7bar) 1344cc / min = 128 lb / h
Note that any test environment versus practical use can have various results depending on peripherals and other technical factors. However, this is very good info on what to expect from the injectors and can be used as basic information when choosing other components for the fuel system such as fuel pump, fuel pressure regulator and fuel filter.
THESE ARE NOT TO REPLACE THE DIRECT PORT INJECTORS!
We cannot except returns if been bench flow tested with fuel as are sold with BOSCH MOTORSPORT Quality control & standards
All our injectors are supplied to us by Bosch UK and are fully traceable back to them.
SHARP MOTORSPORT AUDI 2.5 TFSI EVO DAZA, DNWA, DNWC EA855 UPGRADE MPI 980CC INJECTOR SET
Providing the extra fuel needed for when wanting to get the most on the dual-injected EA855 Engine, replacing the original MPI injectors
The perfect choice when using a TTE700, TTE777 Upgrade turbocharger, or other big frame turbos available.
Tuning partners considered the best in Europe tested many injectors before deciding on these as the best option of choice.
Perfect choice for APR, BEVO, DVX, BRP, UNITRONIC, JD ENGINEERING, software calibration options.
Genuine UK Sourced Bosch Motorsport Injectors
Batch colour matched sets (blue, red, orange)
All-New Generation Bosch fuel injectors will function at rail pressures in excess of 101 PSI, 7 bar.
Will maintain consistency to a minimum pulse width of only 1.5 ms.
Excellent low pulse width response with predictable response down to 2ms.
Excellent atomisation for modern multi-valve engines.
Set of 5 Injectors
Set of 5 Wiring harness adapters
BOSCH EV14 Based Injectors
Precision Cut Atomiser
Loom Adapters included
7 point multi hole
High Impedance
Excellent Response Characteristics
980cc/min = 670g/min = 89lb/hr @ 3bar approx
12-ohm resistance
Petrol & E85 compatible
Plug & Play
Needs Specific Software Adjustment
Colour batch matched set
Not sold as a flow matched set(Same as APR & UNITRONIC)
Static max flow in test environment:
29 PSI (2 bar) 720cc / min = 69 lb / h
43,5 PSI (3 bar) 900cc / min = 86 lb / h
58 PSI (4 bar) 1038cc / min = 99 lb / h
78,5 PSI (5 bar) 1170cc / min = 111 lb / h
88 PSI (6 bar) 1284cc / min = 122 Ib / h
101,5PSI (7bar) 1344cc / min = 128 lb / h
Note that any test environment versus practical use can have various results depending on peripherals and other technical factors. However, this is very good info on what to expect from the injectors and can be used as basic information when choosing other components for the fuel system such as fuel pump, fuel pressure regulator and fuel filter.
THESE ARE NOT TO REPLACE THE DIRECT PORT INJECTORS!
We cannot except returns if been bench flow tested with fuel as are sold with BOSCH MOTORSPORT Quality control & standards
All our injectors are supplied to us by Bosch UK and are fully traceable back to them.
SHARP MOTORSPORT AUDI 2.5 TFSI EVO DAZA, DNWA, DNWC EA855 UPGRADE MPI 980CC INJECTOR SET
Providing the extra fuel needed for when wanting to get the most on the dual-injected EA855 Engine, replacing the original MPI injectors
The perfect choice when using a TTE700, TTE777 Upgrade turbocharger, or other big frame turbos available.
Tuning partners considered the best in Europe tested many injectors before deciding on these as the best option of choice.
Perfect choice for APR, BEVO, DVX, BRP, UNITRONIC, JD ENGINEERING, software calibration options.
Genuine UK Sourced Bosch Motorsport Injectors
Batch colour matched sets (blue, red, orange)
All-New Generation Bosch fuel injectors will function at rail pressures in excess of 101 PSI, 7 bar.
Will maintain consistency to a minimum pulse width of only 1.5 ms.
Excellent low pulse width response with predictable response down to 2ms.
Excellent atomisation for modern multi-valve engines.
Set of 5 Injectors
Set of 5 Wiring harness adapters
BOSCH EV14 Based Injectors
Precision Cut Atomiser
Loom Adapters included
7 point multi hole
High Impedance
Excellent Response Characteristics
980cc/min = 670g/min = 89lb/hr @ 3bar approx
12-ohm resistance
Petrol & E85 compatible
Plug & Play
Needs Specific Software Adjustment
Colour batch matched set
Not sold as a flow matched set(Same as APR & UNITRONIC)
Static max flow in test environment:
29 PSI (2 bar) 720cc / min = 69 lb / h
43,5 PSI (3 bar) 900cc / min = 86 lb / h
58 PSI (4 bar) 1038cc / min = 99 lb / h
78,5 PSI (5 bar) 1170cc / min = 111 lb / h
88 PSI (6 bar) 1284cc / min = 122 Ib / h
101,5PSI (7bar) 1344cc / min = 128 lb / h
Note that any test environment versus practical use can have various results depending on peripherals and other technical factors. However, this is very good info on what to expect from the injectors and can be used as basic information when choosing other components for the fuel system such as fuel pump, fuel pressure regulator and fuel filter.
THESE ARE NOT TO REPLACE THE DIRECT PORT INJECTORS!
We cannot except returns if been bench flow tested with fuel as are sold with BOSCH MOTORSPORT Quality control & standards
All our injectors are supplied to us by Bosch UK and are fully traceable back to them.