TTE810 3.0 TFSI UPGRADE TURBOCHARGER
TTE810 3.0 TFSI UPGRADE TURBOCHARGER
Introducing our TTE810 Turbocharger for the 3.0 TFSI Our latest hybrid evolution for the ultimate blend of power, fast-response, and Plug&Play ease of fitment. Utilizing the original turbocharger but for greater flow and power. Fitted with an large proven TTE billet compressor and our latest bigger 9blade turbine, this turbo is to give more power and torque holding over TTE710 with near same spool & response.
Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled, and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.
Upgrade intercooler, downpipe, sports cat, and full exhaust are recommended, upgrade to the turbo intake and system is also recommended for max performance. Special attention should be noted on the turbo inlet connection size. Any smaller then 66mm will limit performance.
Product Highlights:
Original BWTS turbocharger
TTE Billet Milled compressor 7+7 BLADE 66MM Inlet
TTE 9 Blade oversize High-Flow Low Mass Turbine
Plug and Play installation (Larger inlet recommended)
7pad thrust bearing
600HP+ proven on pump 102 petrol (750HP+ on E85)
Software recalibration is required
Proven TheTurboEngineers quality
Single parts finely balanced then components assembled and core high-speed VSR balanced
Supplied with a balance test result document
Made in Germany
ITS RECOMMENDED A NEW OEM DIVERTER VALVE SHOULD BE FITTED WHEN INSTALLING THE UPGRADE TURBOCHARGER.
TTE810 3.0 TFSI UPGRADE TURBOCHARGER
Introducing our TTE810 Turbocharger for the 3.0 TFSI Our latest hybrid evolution for the ultimate blend of power, fast-response, and Plug&Play ease of fitment. Utilizing the original turbocharger but for greater flow and power. Fitted with an large proven TTE billet compressor and our latest bigger 9blade turbine, this turbo is to give more power and torque holding over TTE710 with near same spool & response.
Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled, and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.
Upgrade intercooler, downpipe, sports cat, and full exhaust are recommended, upgrade to the turbo intake and system is also recommended for max performance. Special attention should be noted on the turbo inlet connection size. Any smaller then 66mm will limit performance.
Product Highlights:
Original BWTS turbocharger
TTE Billet Milled compressor 7+7 BLADE 66MM Inlet
TTE 9 Blade oversize High-Flow Low Mass Turbine
Plug and Play installation (Larger inlet recommended)
7pad thrust bearing
600HP+ proven on pump 102 petrol (750HP+ on E85)
Software recalibration is required
Proven TheTurboEngineers quality
Single parts finely balanced then components assembled and core high-speed VSR balanced
Supplied with a balance test result document
Made in Germany
ITS RECOMMENDED A NEW OEM DIVERTER VALVE SHOULD BE FITTED WHEN INSTALLING THE UPGRADE TURBOCHARGER.
TTE810 3.0 TFSI UPGRADE TURBOCHARGER
Introducing our TTE810 Turbocharger for the 3.0 TFSI Our latest hybrid evolution for the ultimate blend of power, fast-response, and Plug&Play ease of fitment. Utilizing the original turbocharger but for greater flow and power. Fitted with an large proven TTE billet compressor and our latest bigger 9blade turbine, this turbo is to give more power and torque holding over TTE710 with near same spool & response.
Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled, and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.
Upgrade intercooler, downpipe, sports cat, and full exhaust are recommended, upgrade to the turbo intake and system is also recommended for max performance. Special attention should be noted on the turbo inlet connection size. Any smaller then 66mm will limit performance.
Product Highlights:
Original BWTS turbocharger
TTE Billet Milled compressor 7+7 BLADE 66MM Inlet
TTE 9 Blade oversize High-Flow Low Mass Turbine
Plug and Play installation (Larger inlet recommended)
7pad thrust bearing
600HP+ proven on pump 102 petrol (750HP+ on E85)
Software recalibration is required
Proven TheTurboEngineers quality
Single parts finely balanced then components assembled and core high-speed VSR balanced
Supplied with a balance test result document
Made in Germany
ITS RECOMMENDED A NEW OEM DIVERTER VALVE SHOULD BE FITTED WHEN INSTALLING THE UPGRADE TURBOCHARGER.